[HIFLUX] Air Operated Valve (AOV) - Normal Close Type


The Air Operated Valve (AOV) is a valve that opens and closes valves using air pressure.
As air pressure is used, there is almost no danger of an explosion occurring compared with valves that are operated with electric signals.
As the AOV operates under the pressure of as little as about 5kgf/cm2, the product can be used in any place where the air is supplied.
There is the Normal Close Type and the Normal Open Type according to valve conditions, whether the valve is open or closed in normal times.




Step 1. In the normal close type, the stem connected with the round plate goes downward in normal times and the valve is closed.
Step 2. If the air pressure is applied from the lower side at this time, the round plate is moved upward by incoming air pressure.
Step 3. The closed orifice is opened and the fluid (or gas) flows.
Step 4. To close the valve again, it is necessary to block incoming air pressure and vent air within the product.
Step 5. The round plate and the stem go downward again with the restitution force of a spring located in the upper part, the valve closes and blocks the flow of the fluid.



* Features

- Normal close type : When the valve is closed in normal type, if the air is supplied, it will open automatically.
- The minimum working pressure of air is 5kgf/cm2.
- The underbody of A.O.V where liquid or gas passes through also has 4 types as a needle valve.
- The system can be controlled remotely.
- Driven by air, the explosion-proof valve is safer than the electric type which may explode.
- A valve using stainless steel 316 cold material for excellent corrosion resistance.



* Pressure & Tube Size

* Body Types





* [HIFLUX] Air Operated Valve Series - Normal Close Type

15000psi Straight type	15000psi Angle type	15000psi 3Way/1on type	15000psi 3way/2on type
20000psi Straight type	20000psi Angle type	20000psi 3Way/1on type	20000psi 3way/2on type
60000psi Straight type	60000psi Angle type	60000psi 3Way/1on type	60000psi 3way/2on type

* Other product

	High pressure needle valve		High pressure pipe needle valve
	High pressure check valve		High pressure ball valve
	High temperature valve		High pressure control valve
	Air operated valve		High pressure tube fitting
	High pressure tube		High pressure nipple
	Low pressure tube		High pressure gauge
	High pressure regulator		Back pressure regulator
	High pressure union adapter		General pressure regulator
	High pressure adapter		High pressure male adapter
	Tube support
	Safety Head		Rupture disc
	Tooling Set-Coning tool		Tooling Set-Reseating tool
	Tooling Set-Threading tool		Lok Type Fitting
	Lok Type Valve

* Ordering option


- As our products are divided into pressures of 15,000~150,000psi, body type and port size, you can use them according to the specifications which you want to use.
- Our products generally are produced with STS materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used.
- Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, INC600, INC700, Ti and Ni.


* Homepage : http://www.hiflux.net
* SNS : https://www.facebook.com/hiflux.sns